4. Insert the front ink film roll by inserting its blue gear into the
left slot of the unit (
). Insert the rear ink film roll by
inserting its white gear into the left slot of the unit (
• • • • The ink film is safe to touch and will not rub off on your
hands like carbon paper.
• • • • Make sure the blue gear (
installed as shown.
5. Turn the gear of the blue core (
arrow until the ink film is tight (
).
) and white gear (
) are
) in the direction of the
).
17
• • • • Make sure that the ink film is wrapped around the blue
core (
) at least once.
6. Close the back cover securely by pushing down on the
notched area at both ends (
7. Close the front cover securely.
KX-FC379CX
).