Sony Bravia KDL-60R510A Operating Instructions Manual page 40

Option
Display Area
Horizontal
Center
Vertical Center
• Normal in the Wide Mode setting is not available when you are watching a 720p, 1080i or 1080p
source.
• If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for the current
channel. When you change channels (or inputs), Wide Mode is automatically replaced with the
4:3 Default setting for 4:3 sources. To retain the current Wide Mode setting as channels and
inputs are changed, set 4:3 Default to Off.
• 4:3 Default is not available if Auto Wide is set to Off.
Option
PC Settings
• For the PC Input Signal Reference Chart, see page 50.
40
Description
Each setting depends on the resolution you are watching.
Full Pixel Displays pictures in their original size when parts of the picture
are cut off (available depending on the TV model).
+1 Displays pictures in their original size.
Normal Displays pictures in their recommended size.
-1 Enlarges the picture so that the edges are outside the visible
display area.
Allows you to move the position of the picture left and right. (Available in Wide
Zoom and Zoom.)
Allows you to move the position of the picture up and down. (Available in Wide
Zoom and Zoom.)
Description
When a PC is connected to the TV, the PC settings screen appears instead of
the Screen settings.
You can also select the PIP feature which allows you to view two pictures
simultaneously from OPTIONS button (page 23).
Wide Mode Normal
Full 1
Full 2
Reset Resets all PC settings to the default values.
Horizontal Allows you to move the position of the picture left and right.
Center
Allows you to move the position of the picture up and down.
Vertical
Center
Select to display in the original image size.
Select to enlarge the picture to fill the display area,
keeping its original aspect ratio.
Select to enlarge the picture to fill the display area.