Setting The Presentation Timer - ViewSonic Pro8500 User Manual

Setting the presentation timer

The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to
utilize this function:
1. Go to the Setting > Presentation Timer menu and press MODE/ENTER to
display the Presentation Timer page.
2. Highlight Timer Period and decide the timer period by pressing
length of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240
minutes in 5-minute increments.
Important
„
If the timer is already on, the timer will restart whenever the Timer Period is
reset.
3. Press to highlight Timer Display and choose if you want the timer to show up
on the screen by pressing
Selection Description
Displays the timer on screen throughout the presentation
Always
time.
1 Min/2 Min/3 Min Displays the timer on screen in the last 1/2/3 minute(s).
Never Hides the timer throughout the presentation time.
4. Press to highlight Timer Position and set the timer position by pressing
.
Top-Left Bottom-Left
Press to highlight Timer Counting Direction and select your
5.
desired counting direction by pressing
Selection Description
Count Up Increases from 0 to the preset time.
Count Down Decrease from the preset time to 0.
6. To activate the presentation timer, press
press MODE/ENTER.
7. A confirmation message displays. Highlight Yes and press MODE/ENTER to
confirm. You will see the message "Timer is On" displaying on the screen. The
timer starts counting at the time when the timer is on.
ViewSonic Pro8500
/ .
Top-Right Bottom-Right
/
.
and press
/ . The
/
/ to select On and
26