Alcatel-Lucent 8242 User Manual

Phone description
 Access MENU.
 Access MENU.
 Confirm.
 Navigate.
 Access to personal speed dial (Down navigation key).
 In idle or in communication mode: Access the company directory
 In communication mode: Activate/deactivate the mute feature. No feature is
associated with this key in idle mode.
 In communication mode: Activate/deactivate the loudspeaker.
 In idle mode Access the ringer and vibrate adjustment feature.
 Access the DTMF feature during a conversation (Long press ).
 Green steady: the phone is on the charger and the battery is fully charged.
 Red steady: the phone is on the charger and the battery is charging.
 Slow yellow flashing: Telephonic event such as unread message, missed call, etc.
LED  Rapid yellow flashing: Incoming call.
 Red flashing: Out of coverage.
 Flashing when the phone is plugged into the charger means the same as when the
phone is not plugged into the charger.
 3.5 mm jack plug for headset and maintenance.

Short press: Decrease the volume of ring tone during an incoming call (4 steps) or
decrease volume of loudspeaker during a conversation (8 steps).

Long press: Activate/deactivate the mute feature.
Related Documentation - Other languages for these Safety and Regulatory Instructions and User Documentation are available at the following Web site: enterprise.alcatel-lucent.com
Alcatel-Lucent copyright © 2014 - 8AL90307USAAed01
Switch on/off the phone, lock/unlock the phone and
activate standby mode.
 Switch on (long press).

Switch off (long press).

Lock/unlock the phone.
 Standby mode (short press).
 Answer the call.

Long press (feature depending on the
system): redial last number or access the
redial list.

Switching between two calls (Broker
call).

Switch off ringer.
 Hang up.

Return to previous menu.
 Erase a character.

Delete an entire field.
 Short press: Increase the volume of ring tone during an incoming call (4 steps) or
increase volume of loudspeaker during a conversation (8 steps).

Long press: Activate/deactivate the loudspeaker.
 Clip to hook your phone on your belt. You can remove the clip and instead use the cover
that is provided in the phone package.

USB plug for charging the battery and for upgrading the phone.
 Press on this key to light up the screen when the phone is in idle state.

If configured, this key can be used to lock your phone or to send a notification call to
an alarm server. For more information contact your administrator.

Back to homepage.

Programmable keys (F1 and F2 keys).
Depending on whether the device is in vibrate mode or ring mode, this key will
have different effects. It is a shortcut to adjust the vibration/ring effect. Refer
to the section about the audio key.
Charging your telephone battery
How to dock your phone on the desk support
Put your phone on its support. Plug the USB cable into the 5V socket of the
desktop charger. Plug the other end of the USB cable into the AC/DC
adaptor. Plug the AC/DC adaptor into the mains power supply.
If you are using a dual charger, put your phone on the upper slot.
How to charge your phone with the USB cable
Plug the USB cable into the USB port of your phone. The other end of the USB
cable can be plugged into the AC/DC adaptor or into a computer USB port.
You can also charge your phone from any USB plug, such as a computer USB
plug. However, the charging time is longer than charging with the AC/DC
adapter.
LED

Green steady: the phone is on the charger (or plugged on the USB cable) and the battery is
fully charged.
 Red steady: the phone is on the charger and the battery is charging.
Recharge your telephone battery regularly. The telephone can be on or off when recharging the
battery. If the telephone is to remain unused or out of its charger for several weeks, remove the
battery and store it separately.
The battery charging time is less than 3 hours. The charging time is longer if charging through the
USB plug from a device other than the AC/DC adapter.