Using The Charger - Cushman Shuttle 2 Owner's Manual

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
Provide Protection From Elements
Keep cooling fins clean and free of dirt and debris
NEMA 15 - 5R Grounded AC Receptacle
110 - 120 VAC. Dedicated 15 AMP Circuit
Locations outside the US and Canada: Reference
appropriate local electrical code and charger manu-
facturer recommendations for AC power requirements
Looping the DC cord through the steering wheel when charging serves as a good reminder to store the cord out of the way when
finished with charging. The DC plug can be damaged by driving over or catching the cord on the vehicle when driving away.
An ungrounded electrical device may become a physical hazard that could result in an electrical
shock or electrocution.

Using the Charger

The charger may remain plugged into the AC outlet when not in use. To charge the vehicle refer to the instruction
labels on the charger. Insert the polarized DC plug completely into the vehicle receptacle. The charger will automati-
cally start a few seconds after the plug is in place. The charger will automatically stop when the batteries are fully
charged and the DC plug can be removed to permit use of the vehicle.
OPERATING PROCEDURES
Mounting Holes
NOTICE
4 4 4 4
4 - 5