Installation; Prepare The Boiler - Potterton Osprey CF 125 Installation & Service Instructions Manual

2. Installation - Page 13

2.1 Prepare the boiler

These instructions assume you have decided on where the
boiler will be located.
1. Carefully unpack the boiler.
2. Do not discard any packaging until all the items are
accounted for.
3. Position the boiler to ensure the draft diverter is the
required distance from the wall.
4. Remove the top panel - 2 screws.
5. Remove the front door - unhook and lift off.
6. Fit the flue spigot (supplied separately inside the case)
to the draft diverter.
Fig. 9