Step Seven - General Setup; Step Eight - Advanced Setup - Harman Kardon DMC 1000 User Manual

INITIAL SETUP
Video Noise Reduction: We recommend that you leave this setting
at the default "Off". If video signal noise is observed when using the
analog video outputs, turn this setting on to reduce the noise and
improve the picture quality.
Step Seven – General Setup
These general system settings should be accessed with caution.
See Figure 22. If you are uncertain about the proper setting for
any of these options, consult with your dealer or installer, or contact
Harman Kardon Customer Service at www.harmankardon.com.
Figure 22 – General Setup Menu
Software Update: When system software updates are released, this
setting will be used during the installation process. Do not make any
changes here unless instructed to do so.
Date & Time: The first time the DMC 1000 is used, set the local time
and date here.
System Information: This setting displays the software version number
and the amount of hard-disc space available. It is informational only.
Step Eight – Advanced Setup
The settings shown in Figure 23 should be used with caution. If you have
any doubts about whether it is appropriate to change these settings, con-
sult with your Harman Kardon dealer or custom installer.
Figure 23 – Advanced Setup Menu
Backup: This setting is used to back up the system and Media Library
contents to a USB storage device.
Restore: This setting is used to restore a backup copy of the system
settings and Media Library contents. The existing contents of the Media
Library will be erased. Use this feature only in the unlikely event that
the hard-disc drive in your DMC 1000 has been replaced.
24
Downloaded From Disc-Player.com Harman/Kardon Manuals
Reset Factory Defaults: This setting is used to return all of the Setup Menu
settings to their factory defaults. They will then have to be reconfigured
as required for your application. The contents of the Media Library are
not affected by this command.
Network: When the DMC 1000 is connected to a network, the network
settings are identified here. These settings may be used with other devices
when the DMC 1000 is to be used as a media server as part of a home
network. This feature also allows you to test the network connection to make
certain that Internet access is available. Press the "9" key on the remote
twice, to display the Internet Protocol (IP) address on the front panel.
Language Selected: Select the display language for the DMC 1000's menus
here. Choose from the default English, or Spanish, French, German or Italian.
Format USB: This command allows you to reformat a USB device, which
completely erases the contents of the drive. Exercise great caution before
reformatting a drive.
Now that your DMC 1000 has been installed and configured, it's easy
to enjoy your favorite audio and video programs from a variety of media,
including DVDs, CDs, memory cards, USB drives and the DMC 1000's
own Media Library.