Transferring Two Existing Calls - Aastra 6739i User Manual

Handling Calls
IP Phone UI
For a Blind Transfer:
• Press the Key or the
For Consultative Transfer:
• Press the Key or the
Use the following procedure to transfer a call to another extension.
To transfer a call to another extension:
1. Connect to Party 1 (if not already connected). Party 1 is the party you want to transfer.
2. Press the Key or the
3. Press a line/call appearance button followed by the extension number (or the outside number) to Party 2. This
is the Party for which you want to transfer Party 1.
4. To complete a "blind" transfer, press the Transfer Key again before the receiving end answers. To complete a
consultive transfer, remain on the line to speak with the Party 2, before pressing the Transfer Key again to transfer
Party 1 to Party 2. To cancel the transfer, select Cancel on the display screen or press

Transferring Two Existing Calls

The 6739i allows you to perform a transfer of a call when there are currently two active calls on the phone. For example,
on your phone, there are two active calls - Call A and Call B. Call B is on hold. You can perform the following to transfer
Call A to Call B.
IP Phone UI
1. Press the Key or the
2. Press the Line where Call B is on hold.
3. Press the Key or the
Call A is transferred to Call B.
134
during the ringing of an incoming call.
Transfer
after answering the incoming call and speaking with the caller.
Transfer
. You should hear a dial tone as a second line opens up.
Transfer
. Anew line opens.
Transfer
.
Transfer
.
41-001317-00 Rev 02 – 07.2010