Table of Contents
Advertisement
Never install the product in locations with
extreme high or low temperature.
Installing the product in areas subject to temperatures of over 50°C
or below 0°C may result in deterioration of picture quality or other
problems. Pay special attention to ventilation when installing the
product in high ambient temperatures.
Never drop the product, or subject it to severe
impact or vibration.
Malfunction may result.
Never touch the glass on the front of the
product.
This glass is one of the key components.
Be careful not to leave fingerprints or other marks on the glass.
8
SPEED DOME CAMERA
Caution
Never install the product in places where the
lighting conditions fluctuate.
Frequent changes of illumination, for example from unstable
fluorescent lighting, may result in malfunction.
Never expose the product to direct sunlight or
harmful rays.
Direct sunlight or harmful rays may cause fatal damage to the CCD
or internal circuitry.
Never install the product in areas exposed to
rain or water.
If water gets into the product it may cause failure.
Main Features
Auto-focusing 22x Zoom lens
The digital zoom function of the built-in 22x zoom
lens, together with its auto-focus feature, zooms
an image by up to 220x.
Various auto-surveillance functions
·PTZ trace
Manually plays recorded images of up to about
120 seconds.
·Auto swing
Repeats pan and tilt between two preset
positions.
·Group sequence
Switches to and checks a maximum of 128
preset positions in order.
·Tour sequence
Switches to and checks a maximum of 6 group
sequences in order.
Smart P/T function
Pan and tilt speed compensation function linked
to zoom position allows fine manual operation
even during zooming.
Area Masking for 8 points
Area Masking can be set up for up to 8 points.
For Privacy, this device provides a function for
hiding the points for which Area Masking is
selected from the screen.
Day & Night function
Slow-shutter and day and night switching enable
optimum screen monitoring over 24 hours.
✽Slow-shutter function improves CCD sensitivity
by electrically lengthening exposure time.
✽Day & Night function enables the color and
black and white screens to be used respectively
during the day and at night.
OSD (On Screen Display) function
Provides character information displayed on the
monitor, such as the camera ID address, camera
name, preset number, preset name, area name
and sequence status, and easily sets various
camera functions from the OSD menu screen.
Home Position Auto Return function
Returns the dome to a specified preset position
at a fixed time after ending manual operation.
128 Preset Positions
A maximum of 128 preset positions can be set.
The preset function enables you to set the
location you want to monitor at any time.
Auto Flip
For monitoring an object moving below a
camera, run Auto Flip using a joystick controller,
and moving objects can be monitored without
reversing, both up and down and left to right.
9
SPEED DOME CAMERA
Advertisement
Table of Contents
