Speaker Setup; Connecting External Speakers; External Audio Bypass - Sharp Aquos LC-37GA4X Operation Manual

Using external equipment

Speaker Setup

Connecting external speakers

Rear view
How to connect the
speaker cable
Pull up the
1 1 1 1 1
lid.
Insert the
2 2 2 2 2
edge of the
cable.
Put the lid
3 3 3 3 3
back
down.
Make sure to connect the speaker terminal and cable
polarity (L, +) properly
• The speaker terminal has plus (L) and minus (+) polarity.
• Plus is red and minus is black.
• The cables are also divided into plus and minus.
• When connecting the left/right speakers, be sure to
connect the plus/minus terminals with the correct cables.
NOTE
• Unplug the AC cord from the AC outlet before installing
the speakers.
CAUTION
• Make sure external speakers have 4 ohm and 10 watt
specifications.
• Connect the plus/minus terminals with the correct cables.
Incorrect connection may cause a short.

External Audio Bypass

External Audio Bypass automatically optimises the
audio quality to suit supplied speakers.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Speaker Setup", and
then press ENTER.
4
Press a/b to select "External Audio
Bypass", and then press ENTER.
5
Press c/d to select "Yes" or "No", and then
press ENTER.
Selected item
Sets the optimum audio for the supplied
No
speakers.
When you are using your own speakers,
Yes
output the original sound.
NOTE
• When using external speakers, make sure to set "External
Audio Bypass" to "Yes".
• When Dolby Virtual is on, External Audio Bypass
automatically sets to "Yes".
Description
35