Speaker Setup; Connecting External Speakers; Selecting Speakers; External Audio Bypass - Sharp Aquos LC-45GD1E Operation Manual

Using external equipment

Speaker Setup

Connecting external speakers

Rear view
1 1 1 1 1
2 2 2 2 2
3 3 3 3 3
When using external speakers
• Change the speaker setting to "SPEAKER-B".
Make sure to connect the speaker terminal and cable
polarity (L, +) properly.
• The speaker terminal has plus (L) and minus (+) polarity.
• Plus is red and minus is black.
• The cables are also divided into plus and minus.
• When connecting the left/right speakers, be sure to
connect the plus/minus terminals with the correct cables.
NOTE
• Unplug the AC cord from the AC outlet before installing
the speakers.
CAUTION
• Make sure external speakers have 4 ohm and 10 watt
specifications.
• Connect the plus/minus terminals with the correct cables.
Incorrect connection may cause a short.
64
How to connect the
speaker cable
Push down the tab.
Insert the end of the
cable.
Lift the tab back
up.

Selecting speakers

You can output audio using the supplied speakers or
other external speakers.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Speaker Setup", and
then press OK.
4
Press a/b to select "Speaker", and then
press OK.
5
Press c/d to select "SPEAKER-A" or
"SPEAKER-B", and then press OK.
Selected item
SPEAKER-A
Speaker connected to the Display.
SPEAKER-B
Speaker connected to the AVC System.

External Audio Bypass

External Audio Bypass automatically optimises the
audio quality to suit internal (supplied) speakers.
1
Repeat steps 1 to 3 in Selecting speakers
above.
2
Press a/b to select "External Audio
Bypass", and then press OK.
3
Press c/d to select "Yes" or "No", and then
press OK.
Selected item
Sets the optimum audio for the internal
No
(supplied) speakers.
When you are using your own speakers,
output the original sound without using
Yes
External Audio Bypass.
NOTE
• External Audio Bypass is greyed out when Dolby Virtual
is set to "On".
• External Audio Bypass is greyed out when Centre Channel
Input is set to "On".
• When using external speakers (SPEAKER-B), make sure
to set "External Audio Bypass" to "Yes".
• When Dolby Virtual is on, External Audio Bypass
automatically sets to "Yes".
Description
Description