SERVICING YOUR SNOWBLOWER
ENGINE OIL LEVEL CHECK
Check the engine oil level with the engine stopped and in a level
position.
1.Remove the oil filler cap/dipstick and wipe it clean.
2.Insert and remove the dipstick without screwing it into the filler neck.
Check the oil level shown on the dipstick.
3.If the oil level is low, fill to the upper limit mark on the dipstick with
the recommended oil (see page 40).
4.Reinstall the oil filler cap/dipstick.
Running the engine with a low oil level can cause engine damage. This
type of damage is not covered by the Distributor's Limited Warranty.
38
OIL FILLER CAP/DIPSTICK
UPPER LIMIT
UPPER LIMIT