PCI EXPRESS Driver for Macintosh
This driver is for the P2 card on this unit.
The latest driver information can be viewed at the
following website.
https://eww.pavc.panasonic.co.jp/pro-av/
Installation of the PCI EXPRESS
driver
1
Insert the installation CD.
2
Double-click the Macintosh folder on the
CD.
3
Double-click the AJ-PCD35 folder.
4
Double-click "P2Drive Install.dmg" in the
AJ-PCD35 folder.
5
Double-click "P2Drive Install.pkg".
6
When driver installation starts, follow the
instructions on the installation screen.
<Notes>
By installing this driver, it is possible to connect
to this unit to the Macintosh using PCI
EXPRESS to transfer data at a higher rate.
When the P2 card is removed, drag the icon
for the P2 card to Trash and confirm that the
P2 card icon disappears before executing
removal.
Reinsert the P2 card if the P2 card icon is not
displayed.
<Reference>
Occasionally, a message regarding "Device
Removal" may be displayed when the P2 drive is
connected and the Macintosh is turned on.
The same message may also be displayed when
reinserting the P2 card because the P2 card icon
is not displayed, but this is not a malfunction.
Click "OK" and proceed to use the card.
16