Manual Connection Procedures - Dell Wyse ThinOS C10LE Administrator's Manual

Getting Started: Quickly Learning the Basics

Manual Connection Procedures

1. Click the System Settings icon on the Zero Toolbar to
open the System Settings menu, and then click Remote
Connections to open the Remote Connections dialog
box.
2. Use the Broker Setup tab of the Remote Connections
dialog box to configure one of the following
connections:
ICA or RDP connection (select None, select ICA or
•
RDP, click Configure Connection, and then follow
the wizard).
A specific broker server connection (select
•
Microsoft, Citrix Xen, Dell vWorkspace, VMware
View, or Other and then enter the IP Address for the
server in the Broker Server box).
Note: For more details, see "Remote Connections."
3. Click OK, and then restart the thin client (click the
Shutdown icon on the Zero Toolbar to open and use
the Shutdown dialog box to restart the thin client).
(If You Configured an ICA or RDP Connection) After
thin client restart, click the Home icon on the Zero
Toolbar to open the list of available connections, click
the ICA or RDP connection you created, and then log
in.
(If You Configured a Specific Broker Server Connection)
After thin client restart, the Login dialog box appears
for your server.
Enter the User name, Password, and Domain and click
Login.
After authentication is successful, your Zero Toolbar is
presented with your assigned connections defined by
the broker server.
5