Dell Wyse ThinOS C10LE Administrator's Manual page 59

Configuring Connection Settings Locally
Use the following guidelines on the Options tab:
Auto-connect to local devices - Select any options (Printers, Serials, USB, Smart
•
Cards, Sound, and Disks) to have the thin client automatically connect to the
devices (an ICA session will not automatically connect to a device through a serial
port).
Turn compression off - When selected, turns compression off (intended for
•
high-speed connections).
Optimize for low speed link - When selected, allows optimization for low-speed
•
connections, such as reducing audio quality and/or decreasing protocol-specific
cache size. Intended for a connection spanning a WAN link or using dialup.
Map all disks under (z:) - When selected, maps all disks under the Z drive.
•
Enable session reliability - When enabled, session reliability allows a user to
•
momentarily lose connection to the server without having to re-authenticate upon
regaining a connection. Instead of a user's connection timing out after X seconds,
the session is kept alive on the server and is made available to the client upon
regaining connectivity. Session reliability is most relevant for wireless devices.
Allow font smoothing - When selected, enables font smoothing (smooth type).
•
53