Sony Ericsson Z200 User Manual page 39

Tip: If there are no data account or WAP profile
settings in your phone, you can enter data account
settings when you enter WAP profile settings.
You can choose from GPRS data or GSM data
account types. If you want to change access type,
you have to create a new data account and select
the access type you want to use.
Note: Please contact your network operator
for charging details.
GPRS
GPRS (General Packet Radio Service)
allows fast and efficient access where you
can always be online.
Note: You need a subscription that supports GPRS.
GPRS settings that are available:
• APN (Access point name address) – the address of
the external data network you want to connect to,
either an IP address or a text string.
• User id – your user id to log on to the external
data network.
This is the Internet version of the user's guide. © Print only for private use.
• Password – your password to log on to the
external data network.
• Passwd request (Password request) – if this
setting is on, you are asked for a password each
time you log on to the external data network.
• Allow calls (Preferred service) – if you want
to be able to accept incoming calls during
a GPRS session, select Automatic. If not,
select GPRS only.
• IP address – the IP address that the phone uses
when communicating with the network. If you do
not enter an address, the network provides you
with a temporary IP address.
• DNS address – if the network does not provide
the IP address to the DNS server automatically,
you may enter it here.
• Advan. settings (Advanced settings) – these are
optional. Consult your network operator.
GSM
GSM settings include some settings that are
similar to GPRS settings and some that are
GSM specific as follows:
• Phone number – the phone number of
your Internet service provider.
Setting up WAP 39