Using A Subwoofer - Yamaha EMX 5000-20 Owner's Manual

28
Example setups

Using a subwoofer

Here is an example of using a subwoofer in the speaker system.
If you are using a sub-woofer, press the LPF ON/OFF switch (located in the lower right of the EMX5000-20/
EMX5000-12) to send the low-range signal to the sub-woofer. The frequency range below the frequency spec-
ified by the control knob (80–120 Hz) will be output to the sub-woofer.
EMX5000-20/EMX5000-12—Owner's Manual
Main
speakers
Power AMP
Subwoofer