Yamaha YZF R1 Owner's Manual page 32

INSTRUMENT AND CONTROL FUNCTIONS
This function allows you to se-
lect the engine speed at which
the indicator light is deactivat-
ed.
e. Shift timing
brightness:
This function allows you to ad-
just the brightness of the indi-
cator light
preference.
4
TIP
The display shows the current setting
for each function, except the shift timing
indicator light activity function.
To adjust the brightness of the multi-
function meter displays and tachometer
1. Turn the key to "OFF".
2. Push and hold the "SELECT" but-
ton.
3. Turn the key to "ON", and then re-
lease the "SELECT" button after
five seconds.
4. Push the "RESET" button to select
the desired brightness level.
5. Push the "SELECT" button to con-
firm the selected brightness level.
The control mode changes to the
shift timing indicator light activity
indicator light function.
To set the shift timing indicator light ac-
tivity function
to suit your 1. Push the "RESET" button to select
one of the following indicator light
activity settings:
●
●
●
The indicator light stays on
when activated. (This setting
is selected when the indicator
light stays on.)
The indicator light flashes
when activated. (This setting
is selected when the indicator
light flashes four times per
second.)
The indicator light is deacti-
vated; in other words, it does
not come on or flash. (This
setting is selected when the
indicator light flashes once
every two seconds.)
4-14
2. Push the "SELECT" button to con-
firm the selected indicator light ac-
tivity. The control mode changes to
the shift timing indicator light acti-
vation function.
To set the shift timing indicator light ac-
tivation function
TIP
The shift timing indicator light activation
function can be set between 7000 r/min
and 15000 r/min. From 7000 r/min to
12000 r/min, the indicator light can be
set in increments of 500 r/min. From
12000 r/min to 15000 r/min, the indica-
tor light can be set in increments of 200
r/min.
1. Push the "RESET" button to select
the desired engine speed for acti-
vating the indicator light.
2. Push the "SELECT" button to con-
firm the selected engine speed.
The control mode changes to the
shift timing indicator light deactiva-
tion function.