Yamaha YZF R1 Owner's Manual page 28

INSTRUMENT AND CONTROL FUNCTIONS
Push the "SELECT" button to switch
the display between the odometer
mode "ODO", the tripmeter modes
"TRIP 1" and "TRIP 2", the instanta-
neous fuel consumption mode "km/L",
"L/100 km" or "MPG", and the average
fuel consumption mode "AVE_ _._
km/L", "AVE_ _._ L/100 km" or "AVE_
_._ MPG" in the following order:
ODO → TRIP 1 → TRIP 2 → km/L,
4
L/100 km or MPG → AVE_ _._ km/L,
AVE_ _._ L/100 km or AVE_ _._ MPG
→ ODO
If the fuel level warning light comes on
(see page 4-3), the display automatical-
ly changes to the fuel reserve tripmeter
mode "TRIP F" and starts counting the
distance traveled from that point. In that
case, push the "SELECT" button to
switch the display between the various
tripmeter, odometer, instantaneous fuel
consumption and average fuel con-
sumption modes in the following order:
TRIP F → km/L, L/100 km or MPG →
AVE_ _._ km/L, AVE_ _._ L/100 km or
AVE_ _._ MPG → ODO → TRIP 1 →
TRIP 2 → TRIP F
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second.
If you do not reset the fuel reserve trip-
meter manually, it resets itself automat-
ically and the display returns to the prior
mode after refueling and traveling 5 km
(3 mi).
Instantaneous fuel consumption mode
1. Instantaneous fuel consumption display
4-10
The instantaneous fuel consumption
display can be set to either "km/L",
"L/100 km" or "MPG".
●
"km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
●
"L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
●
"MPG": The distance that can be
traveled on 1.0 US gal of fuel un-
der the current riding conditions is
shown.
To switch between the instantaneous
fuel consumption displays, push the
"SELECT" button for one second when
one of the displays is shown.
TIP
If traveling at speeds under 10 km/h
(6.0 mi/h), "_ _._" is displayed.
1