Launch Mode - Dodge Viper 2014 SRT User Manual

O PE RAT ING YOUR VE HI CL E

LAUNCH MODE

• This system maximizes acceleration
traction for straight line racing.
1. Bring vehicle to a complete stop.
2. Set the steering wheel for straight ahead
driving.
3. Fully depress the clutch and select the
first gear position.
4. Press and release the "LAUNCH" But-
ton (Located on the steering wheel con-
trols).
5. Rapidly press the accelerator pedal to
the floor within 1/2 second.
NOTE:
If the cluster launch EVIC message indicates all conditions are correct for launch and the
throttle is pressed to the floor quickly (within approximately 1/2 second) the system will
hold the engine speed to a preset speed (below the engine rev limiter speed).
6. Release the clutch aggressively. Do not ride the clutch.
• Release the accelerator pedal to deactivate launch control. Pressing the launch control
button or actuating the brakes will also deactivate launch control.
NOTE:
• Launch Mode brings the engine to optimum launch RPM and waits for the driver to
release the clutch. Launch Mode then uses engine throttle only to achieve controlled
wheelslip for maximum acceleration through first gear.
• If the cluster launch EVIC message indicates all conditions are correct for launch and
the throttle is pressed to the floor quickly (within approximately 1/2 second) the system
will hold the engine speed to a preset speed (below the engine rev limiter speed).
• Launch Mode can be used in any of the Electronic Stability Control (ESC) Modes.
Launch Mode is intended for off-highway or off-road use only and should not be used
on any public roadways. It is recommended that this feature be used in a controlled
environment, and within the limits of the law. The capabilities of the vehicle as
measured by the performance pages must never be exploited in a reckless or dangerous
manner, which can jeopardize the user's safety or the safety of others. Only a safe,
attentive, and skillful driver can prevent accidents.
WARNING!
23