Making/Answering Calls; Making Calls - Panasonic KX-TG7331BX Operating Instructions Manual

TG7331-7341BX(e).book Page 17 Wednesday, August 20, 2008 10:31 AM

Making calls

Using the handset
1
Lift the handset and dial the phone
number.
L To correct a digit, press {C/T}.
2
{C}
3
When you finish talking, press
{ih} or place the handset on the
base unit or charger.
Using the speakerphone
1
Dial the phone number, and press
{s}.
L Speak alternately with the other
party.
2
When you finish talking, press
{ih}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list (each 24 digits
max.).
1
j (right soft key)
2
{V}/{^}: Select the desired phone
number.
3
{C}
Erasing a number in the redial list
1
j (right soft key)

Making/Answering Calls

2
{V}/{^}: Select the desired phone
number. i K i M
3
{V}/{^}: "Yes" i M i {ih}
Using the base unit
1
{s}
2
Dial the phone number.
3
When the other party answers,
speak into the microphone.
L Speak alternately with the other
party.
4
When you finish talking, press {s}.
Note:
L Use the speakerphone in a quiet
environment.
L While on a call, you can switch from
the base unit to the handset:
– Press {C} on the handset, then
press {s} on the base unit.
– If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press {^} or {V} repeatedly while
talking.
Redialling the last number dialled
{s} i {R}
Pause (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 22).
Example: If you need to dial the line
access number "0" when making outside
calls with a PBX:
17