Displaying Pc Screen On Tv - Panasonic TH-42PV600AZ Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the unit can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 28)
TV/AV
R G Y B
1 2 3
■
PC menu setting (changed as desired)
•
Making settings "How to Use Menu Functions"
Menu Item
Menu, Contrast, Brightness, Sharpness, Colour temperature (p. 16)
W/B High R
W/B High B
Advanced
W/B Low R
setting
W/B Low B
Gamma
Input
resolution
Clock
H-pos
PC
setup
V-pos
Clock phase
Sync
HDMI setting, Side panel, Power save (p. 16)
•
Sound menu (p. 16)
Select the external input
1
TV/AV
Select "PC"
2
B (To next page)
Y
■
To return to TV
Adjustments / Confi gurations(options)
White balance of bright red area
White balance of bright blue area
White balance of dark red area
White balance of dark blue area
(2.0 / 2.2 / 2.5 / S Curve)
Switches to a wide view
•
VGA (640 x 480 dots), WVGA (852 x 480 dots),
XGA (1,024 x 768 dots), WXGA (1,366 x 768 dots)
•
Options change depending on signals
Set to the minimum level if noise occurs
Adjust horizontal position
Adjust vertical position
Eliminate fl icker and distortion
•
Adjust after Clock adjustment
Chooses another synchronous signal if the image is distorted (H&V / On G)
•
H&V : by the horizontal and vertical signals from your PC
On G : by the green signal from your PC (if available)
Displays PC screen
TV/AV
to (p. 16)
•
Set to the minimum level if noise occurs
•
Corresponding signals
(p. 33)
•
If "H-freq." or "V-freq."
is shown in red, the
signals may not be
supported.
and
repeatedly adjusted
21