To freely change settings after Auto setup
Select the programme number
and search through the channel
Programme
Channel
number
1
Manual tuning
Search down/up
Store
Exit
Return
Programme down/up
For Manual tuning, using the buttons on the unit
("Tuning mode" on p. 7)
(Press repeatedly until "Tuning mode" appears)
or
(Access Tuning menu)
(Press repeatedly until "Manual tuning" is reached)
or
(Access Manual tuning)
(Programme, Channel (not displayed), Sound system)
or
(Change programme, Start searching channels, Change sound system)
(Store)
-
(Repeat)
•
Not available when Child lock in Setup menu is set
(p. 16).
If the sound is weak or distorted, change the sound system used for a programme channel. (5.5MHz / 6.5MHz)
Select the channel you want to adjust
If the image is strange, change the colour system to the correct transmition signal being received. (Auto / PAL /
NTSC 4.43 / NTSC 3.58)
Select the channel you want to adjust
•
Normally, select "Auto"
For the small adjustments to the tuning of an individual channel (useful for example when weather conditions are
affecting reception quality of a programme)
Select the channel you want to adjust
•
To cancel Fine tuning, tune again by Manual tuning
For the skip programme numbers which have no tuning datas
Select the channel you want to skip
•
This function is only effective when pressing the Programme number up or down button either on the TV unit or
on the remote control.
select
search
Set this function
Set this function
Set this function
Set "Skip" to "On"
Store
•
The programme
number blinks.
■
Programme number
(fl ash)
Sound system
(fl ash)
Channel
Repeat
and
Note
•
If a VCR is
connected with
only the RF
cable, select
programme
number "0".
To return to TV
1
5. 5MHz
5. 5MHz
Manual tuning (Front panel)
-, +
: Search
TV / AV : Move cursor
STR
: To store
F
: To exit
STR
F
- /
+ /
TV / AV
19