Product Description; Installing Batteries; Setting Up Your Smart Scale Using Bluetooth® 4.0 Technology - HoMedics Smart ScaleSC-902 Instruction Manual And Warranty Information

PRODUCT DESCRIPTION

FRONT & BACK VIEW
& Button
p q
SET Button
Platform with
electrodes
LCD READOUT & BUTTON DESCRIPTION
FUNCTION KEYS
SET
• Confirmation button for selection
• Recall settings of user memory locations
p or q
• Changes value of height, age and activity level, toggle between Male/Male Athlete and
Female/Female Athlete
• Scroll through user memory P1 - P8
UNIT / CONNECT
• Quick single clicks will change between pound, kilogram and stone units of measurement
• Press and hold to send a transmission to connect via Bluetooth® to your mobile device
4
LCD Readout Battery Compartment
Unit of Measure and
Connect Button

INSTALLING BATTERIES

This scale operates on 3 AAA alkaline batteries (included). Open the battery
cover on the back of the scale unit. Remove any plastic wrap from the
batteries. Insert the batteries. Be sure the polarity of the batteries is set correctly
for the scale to function properly. Always replace all batteries at the same
time; do not combine old and new batteries. Do not mix Alkaline, carbon zinc
(standard) or Nickel- Cadmium (rechargeable) batteries. If you do not intend
to use this unit for a prolonged period of time, it is advisable to remove the
batteries before storing.
AUTOMATIC SHUT-OFF
To conserve battery life this scale has an automatic shut-off feature. If the scale is
turned on and not touched, it will display "0.0" and turn off after 10 seconds. If the
scale is turned on, a measurement taken and weight is locked, the measurement
readings will be displayed and the scale will shut off after 10 seconds.
CALORIEPREDICTOR® FEATURE
The CaloriePredictor feature uses your gender, height, age, current weight and
an activity level setting to estimate number of calories you can consume a day to
maintain your present weight. This estimation may gradually help you with a weight
loss, gain or maintenance plan.
SETTING UP YOUR SMART SCALE
USING BLUETOOTH® 4.0 TECHNOLOGY
You can use your Smart Scale with or without Bluetooth 4.0 transmitting data. Below
are the directions for setting up the scale using Bluetooth 4.0. For instructions on
setting up the scale as a stand-alone scale only, please see page 11.
SMART SCALE REQUIREMENTS
The Smart Scale is designed to be used with the following:
iOS
•
iPhone, iPad and iPod touch using iOS 6 and above
Android
•
The following products: Samsung Galaxy S3/S4/ Note II,
HTC One and Google Nexus 4
• Compatible with devices running Bluetooth® 4.0 technology
and above
5