Wolf OG30 Installation Manual page 13

Outdoor Grill Installation
LP Gas Installations
PORTABLE LP CONNECTION
One of the many features of the Wolf grill cart is the
pull-out shelf for easy access to the LP gas cylinder. It is
designed to hold a 20-lb (5 gallon capacity) LP gas
cylinder.
1) To install the LP gas cylinder, pull out the shelf and
place the cylinder on it.
2) Check to ensure that the gas valve on top of the
cylinder is closed.
3) Connect the LP gas regulator to the cylinder and
hand-tighten only. Open the cylinder valve. Check for
leaks according to the gas leak testing procedure on
page 12.
4) Tighten the thumb screw to secure the cylinder to the
shelf.
Always check for gas leaks after changing the LP gas
cylinder.
Grill cart pull-out shelf.
LP GAS CONNECTION
Install the pressure regulator and hose assembly supplied
with the grill as shown in the illustrations below. Connect
3
the / " flare end of the hose to the grill coupling using a
8
3
/ " open wrench. Do not apply pipe sealant to the
4
flare connection. Connect the regulator to the LP cylinder
hand-tighten, do not use a wrench.
The LP pressure regulator and hose supplied with the
grill must be used without alteration.
Do not place more than one LP gas cylinder in an
enclosure at one time.
GRILL
COUPLING
REGULATOR
HOSE
ASSEMBLY
VENT
LP GAS
CYLINDER
VENT
LP gas connection.
wolfappliance.com
3
/ "
8
REGULATOR
COUPLING NUT
TO GRILL
VENT
LP GAS
CYLINDER
LP gas regulator.
13