Operation; Thermal Overload Protector - Broan 192 Installation Instructions Manual

OPERATION

Before using heater, make sure heater has been
properly installed according to installation steps
under "INSTALLATION" on page 3.
The heater can be operated using its built-in ther-
mostat or a remote thermostat (such as the Model
86W Line-Voltage thermostat or an appropriate
low-voltage thermostat and transformer/relay). The
Model 85 Kit is available for surface-mount applica-
tions. Purchase these accessories separately.

THERMAL OVERLOAD PROTECTOR

Your heater is equipped with a manual-reset ther-
mal overload protector. If heater fails to operate
when thermostat is turned to its highest setting:
1) Turn off power at service entrance.
2) Remove knob and grille.
3) Press button marked "RESET" .
This type of device is particularly useful (compared
to automatic reset devices) because it encourages
the user to find and correct the cause of overheat-
ing unit when resetting the protector.
TO AVOID PROPERTY DAMAGE WHEN USING
THIS HEATER TO PREVENT FREEZE-UPS:
Make sure heater functions properly before leav-
ing unattended. A tripped protector will prevent the
heater from operating.
DRYWALL
THERMAL
OVERLOAD
GRILLE
BUILT-IN
THERMOSTAT
HEATER HOUSING
POWER CABLE
MODELS 192 • 194 • 198
Page 6