Miele G 8072 Operating Instructions Manual page 12

Warning and Safety instructions
Only use low-foaming cleaning
agents which have been approved
by Miele. Foam can have an adverse
effect on the cleaning process.
Where a chemical additive is
recommended on technical
application grounds (e.g. a cleaning
agent), this does not imply that the
manufacturer of the machine takes
liability for the effect of the chemical on
the items being cleaned.
Please be aware that changes in
formulation, storage conditions etc.
which may not be publicised by the
chemical manufacturer, can have a
negative effect on the cleaning result.
When using cleaning agents and
specialised products it is essential
that the manufacturer's instructions are
followed. They must only be used for
the purpose for which they are
designed to avoid such dangers as
chemical reactions and material
damage.
The machine is designed only for
operation with water and cleaning
agents. Organic solvents must not be
used in the machine, as there is the
danger under certain circumstances of
explosion. (Although this is not the case
with all organic solvents, other
problems could arise with their use, for
example damage to rubber and
synthetic materials).
12
In critical applications where very
stringent requirements have to be
met, it is strongly recommended that all
the relevant factors for the process,
such as cleaning agent, water quality
etc., are discussed with the Miele
Application Technology specialists.
The special inserts should only be
used for their specific application.
Empty any containers or utensils
before arranging them in the
machine.
Do not allow any remains of acids
or solvents, and in particular
hydrochloric acid or chloride solutions,
to get into the wash cabinet. Similarly
avoid any materials with a corrosive
effect.
The presence in compounds of any
solvents should be minimal (especially
those in hazard class A1).
To avoid any corrosion damage,
ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the steel outer
casing of the machine.
Please follow the advice on
installation in these instructions
and the separate Installation
Instructions.