Vivotek FE8174 User Manual page 12

VIVOTEK
Attach the Dome Cover
12 - User's Manual
NOTE:
You may also install the camera to a U.S. standard 4 in. junction
box. You can align the camera's curved slots with the mounting
holes on a junction box. Use diagonal mounting positions on the
camera to match those on a junction box.
Install the plastic dome cover by aligning the snap-
fit tabs on the dome cover with the slotted tabs on the
camera base. Install the dome cover by pressing it even-
ly to the camera base.
Make sure the dome cover and the base plate are flush-
aligned before pressing down. The dome cover is se-
cured using a snap-fit mechanism.
Slotted tabs
Snap-fit tabs
Dome cover