Creating a top or bottom margin
1
Place paper in the drawer(s).
When using this mode in bypass copying (
2
Place the original(s).
3
Press the [EDIT] button to enter the edit menu, and then press the
[IMAGE SHIFT] button.
4
Press the [TOP] (or [BOTTOM]) button.
5
Adjust the margin width by pressing the [2 mm] or [100 mm] button,
and then press the [ENTER] button.
The default width of the margin is 7 mm.
In duplex copying, margins on the back are created on the other side of those in the
front. (
P.125 "Duplex Copying")
P.85), be sure to specify the paper size.
IMAGE SHIFT
159