Table of Contents
Advertisement
KX-FL513RU
8.1.6.
CLEANING
The toner attached to the surface of the OPC drum is transferred to the paper at the transcription stage, but a part of the toner
remains. The cleaning is the stage that cleans the remain toner after the transcription stage. The remain toner on the drum and the
toner which was attached to the place where the laser beam didn´t scan are gathered to the developing roller to be used again.
When no paper is supplied, the transfer roller is minus-charged to eliminate the minus-charged toner.
Cleaning Part
201
Advertisement
Table of Contents
Troubleshooting
