Starting To Use Pc Suite - Nokia 6600 Software Installation

Tip! The folders
on your PC that contain
information about your
phone will also be named
according to the name
you give your phone at
this point.
10 Copyright © 2003 Nokia. All rights reserved.

Starting to use PC Suite

You can start PC Suite from the
point to PC Suite for Nokia 6600, and then click
If you are connecting your Nokia 6600 to the PC for the first time, after starting PC Suite
you are asked to do two things:
• Name your phone.
You can use more than one Nokia 6600 with PC Suite. To be able to identify individual
phones, you must give a name for your phone.
• Select tasks to be created.
To be able to back up and synchronise information between your Nokia 6600 phone and
PC, you must have appropriate tasks created. During the first connection, PC Suite lists
tasks that can be created automatically. You do not have to create these tasks at this
point, if you do not want to. However, if you create the tasks, you can edit them later.
To create these tasks, proceed as follows:
1 When the first connection is established, the
box appears. Type a name for your phone in the box and click OK.
2 Next, you will be asked for tasks that you want to perform with PC Suite. In the
Tasks dialog box, select the tasks that you want PC Suite to create and click OK. You
can edit these tasks later, if you want.
Note: Making or answering phone calls during a PC connection is not
recommended, as it might disrupt operation.
Online and offline modes
You can use PC Suite either in online mode or in offline mode. You have the following
options:
Start menu: click the Start button, select
PC Suite for Nokia
Welcome to PC Suite for Nokia 6600
Programs and
6600.
dialog
Create