Assembly - Weslo WCTL39320 User Manual

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires your own Phillips screw-
driver , adjustable wrench
pliers .
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
To identify small parts during assembly, use the part identification drawings below.
1 1/2" Screw (79)–4
1. Make sure that the power cord is not plugged in.
!
!
With the help of a second person, carefully tip the
treadmill onto its left side. Partially fold the Frame (12) so
the treadmill will be more stable; do not fully fold the
treadmill until it is completely assembled.
Attach two Base Pads (97) to the bottom of the Base (82)
with two 3/4" Tek Screws (76). Attach a Wheel (95) to the
outside of the Base with a Wheel Bolt (86) and a Wheel
Nut (125).
Console Screw (68)–2
4" Bolt (89)–4
Wheel Bolt (86)–2
3" Bolt (47)–4
, wire cutters
3/4" Tek Screw
(76)–4
1
6
, and needlenose
Silver Screw
(107)–1
Washer (29)–8
Wheel Nut (125)–2
76
86
97
95
82
97
125
76
12