1. Manuals
  2. Brands
  3. Weslo Manuals
  4. Treadmill
  5. 30551.1
  6. User manual

Weslo 30551.1 User Manual

Hide thumbs Also See for 30551.1:
Table of Contents

Advertisement

Quick Links

Model No. 30551.1
Serial No.
Write the serial number in the space
above for future reference.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete cus-
tomer satisfaction. If you have
questions, or if parts are damaged
or missing, PLEASE DO NOT
CONTACT THE STORE. For assis-
tance, contact our Customer
Service Department.
CALL TOLL-FREE:
1-888-936-4266
Mon.–Fri., 8:00 until 17:00 EST
(excluding holidays)
OR E-MAIL US:
customerservice@iconcanada.ca
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Visit our website at
www.proform.com
Visit our website at
USER'S MANUAL
Visit our website at
www.weslo.com
Visit our website at

Advertisement

Table of Contents
loading

Related Manuals for Weslo 30551.1

Summary of Contents for Weslo 30551.1

  • Page 1 Model No. 30551.1 USER'S MANUAL Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete cus- tomer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE DO NOT CONTACT THE STORE.

  • Page 2: Table Of Contents

    Apply the decal in the location shown. Note: The decals may not be shown at actual size. English: Portugese Polish Hungarian Russian WESLO is a registered trademark of ICON IP, Inc. 232971...

  • Page 3: Important Precautions

    IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product.
  • Page 4 DANGER: 20. Do not attempt to raise, lower, or move the Always unplug the power treadmill until it is properly assembled. (See cord immediately after use, before cleaning ASSEMBLY on page 6 and HOW TO FOLD the treadmill, and before performing the AND MOVE THE TREADMILL on page 15.) maintenance and adjustment procedures de- You must be able to safely lift 45 lbs.

  • Page 5: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the WESLO ® CADENCE 80 reading this manual, please see the front cover of this treadmill. The CADENCE 80 treadmill combines ad- manual. To help us assist you, note the product model vanced technology with innovative design to let you number and serial number before contacting us.

  • Page 6: Assembly

    Washer (29)–4 Star Washer (81)–4 2 3/4” Bolt (47)–4 ASSEMBLY Handrail Washer (11)– Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not 4” Bolt (120)–2 dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
  • Page 7 1. Make sure that the power cord is unplugged. Have a second person hold the Base (52) in the position shown. Attach six Base Pads (63) (three are shown) to the Base (52) with six Base Pad Screws (26). Identify the Left Upright (53), which has two small holes near the upper end.
  • Page 8 3. Have a second person lift and hold the front end of the Frame (51). Hold a Frame Spacer (11) be- tween the Right Upright (54) and the Frame. Attach the Right Upright to the Frame with a Frame Pivot Bolt (1), an Upright Washer (14), and an Upright Star Washer (9).
  • Page 9 6. Set the Left and Right Handrails (22, 33) and the Console Assembly (91) on the Uprights (53, 54). Tighten the four Handrail Bolts (8) with the four Handrail Star Washers (5) into the Left and Right Uprights (53, 54) and the Left and Right Handrails (22, 33).
  • Page 10 8. Carefully lower the Left and Right Handrails (22, 33) until they are touching the floor. See the lower drawing. Position the Uprights (53, 54) so that the treadmill Frame (51) is cen- tered between the Uprights. 22, 33 Firmly tighten the four Upright Bolts (2) and the two Frame Pivot Bolts (1) used in steps 1 and 3.

  • Page 11: Operation And Adjustment

    OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- GFCI-equipped outlets.
  • Page 12 CONSOLE DIAGRAM Speed Increase Button Speed Decrease Button Clip Note: If there are sheets of clear plas- tic on the console, remove the plastic. HOW TO TURN ON THE POWER Next, stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing above) and IMPORTANT: If the treadmill has been exposed to slide the clip onto the waistband of your clothes.
  • Page 13 HOW TO OPERATE THE CONSOLE The upper dis- play—The upper 1. Insert the key into the console. display can show the elapsed time, See HOW TO TURN ON THE POWER on page the distance that you have walked or run, the approximate number of calories that you 2.
  • Page 14 HOW TO CHANGE THE INCLINE OF THE TREAD- MILL Incline To vary the intensity of your exercise, you can change Incline the incline of the treadmill. There are three incline lev- Incline els. Before changing the incline, remove the key Legs and unplug the power cord.

  • Page 15: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the Frame treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right.
  • Page 16 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Next, lower the frame until it is past the latch pin.

  • Page 17: Troubleshooting

    TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
  • Page 18 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 11. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- 2–3 in.

  • Page 19: Exercise Guidelines

    EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.

  • Page 20: Part List

    PART LIST – Model No. 30551.0 R0607A No. Qty. Description No. Qty. Description No. Qty. Description Frame Pivot Bolt Motor Star Washer Base Endcap Upright Bolt Wire Harness Walking Belt Tie Holder Screw Ground Star Washer Handrail Endcap Console Back Screw Belly Pan Screw Platform Cushion Handrail Star Washer...

  • Page 21: Exploded Drawing

    EXPLODED DRAWING A – Model No. 30551.0 R0607A...
  • Page 22 EXPLODED DRAWING B – Model No. 30551.0 R0607A 42 95...
  • Page 23 EXPLODED DRAWING C – Model No. 30551.0 R0607A...

  • Page 24: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...

This manual is also suitable for:

Cadence 80

Table of Contents