Table of Contents
Advertisement
Note: Once you create the first volume on the NSA, it is recommended to restart the NSA
for better performance.
7.4 Editing a Volume
Click an internal volume's Edit icon in the Storage screen as shown in
open the following screen. Use this screen to change the volume's name.
Figure 60 Storage > Edit
The following table describes the labels in this screen.
Table 24 Storage > Edit
LABEL
Volume Name
Apply
Cancel
Media Server User's Guide
DESCRIPTION
For an internal volume, type a volume name from 1 to 31 characters. To avoid confusion, it is
highly recommended that each volume use a unique name.
Acceptable characters are all alphanumeric characters and " " [spaces], "_" [underscores],
and "." [periods].
The first character must be alphanumeric (A-Z 0-9).
The last character cannot be a space " ".
For an external volume, type a volume name from 1 to 32 single-byte (no Chinese
characters allowed for example) ASCII characters. The name cannot be the same as another
existing external volume.
Click this to save your changes and rename the volume.
Click this to close this screen without saving your changes.
Chapter 7 Storage
Figure 57 on page 153
to
157
Advertisement
Table of Contents
