Sunbeam BC1712G Owner's Manual page 7

Owner's Manual,
Model BC1712G Portable Gas Grill
Step 4
Position handle support (14)
F I K 14 7 B
between handle and grill, and
attach side handles (7) to grill
bottom (2) as shown, using medium
bolts (B), small washers (K), small
lock washers (I) and small wing
nuts (F).
3
Step 5
Attach legs (3) to grill bottom as
shown, by inserting into holes in
side handles.
Step 6
Position heat shield (13) between burner
6
and grill bottom, and secure burner (6),
and heat shield (13) to grill bottom using
13
burner bolt (D). Assure that the lighting
hole in the heat shield lines up with the
hole in the grill bottom. Finger tighten gas
9
regulator valve (9) to threaded burner inlet,
as shown.
IMPORTANT: The gas regulator valve is
D
properly positioned when the hex portion
of regulator valve is flat against burner
2
inlet.
Note: when attached, the regulator valve
will rotate.
BC1712G owner's manual 6