Carrier Thermostat Homeowner's Manual page 16

COMMON TERMS AND WHERE TO FIND THEM
clean FILTER indicator and restarts the
system. Press the RESET FILTER button
after you've cleaned and replaced the
system's air filter.
Set Points ...............................Pg. 1
The heating and cooling temperature
set points you wish the system to
maintain and have entered into the
thermostat. The actual room
temperature will automatically be
displayed, but you can check the desired
temperature by pressing either the UP or
DOWN button. While the SET TEMP
indicator is lit, press the MODE button
to display the desired temperature set
points for the other mode.
Temperature Sensor ...............Pg. 7
The temperature sensor measures the
current indoor or outdoor temperatures
which are displayed on the thermostat.
Up and Down Buttons ...........Pg. 1
These buttons are used to set your
desired temperature set points.
11