Press Cutting; Miter Cutting - Hitachi C 12LSH Technical Data And Service Manual

(11) Press cutting

Maker
Max.
Model
cutting
dimensions
107 x 107
Height x Width
(4-3/16" x 4-3/16")
(H x W)
Press cutting with the head swiveling enables cutting workpieces
as large as shown in Table 5 in a single sawing operation. It is
convenient for cutting narrow workpieces (Fig. 10).

(12) Miter cutting

* These numeric values are for the models destined for the U.S.A. and Canada.
Refer to "5. SPECIFICATIONS" as the capacities are different depending on the destinations.
Maker
Model
Max.
cutting
dimensions
Right and left 45û
Height x Width
(H x W)
Right 57û (Hitachi
C 12LSH, C 12RSH)
Right and left 57û
(Hitachi C 12FSA)
Right 60û (C)
Height x Width
(H x W)
Workpieces as wide as shown in Table 6 can be cut by
swiveling the turn table (right and left).
The maximum cutting dimensions in [
obtained by adjusting the lower limit position of the saw blade
indicated in Fig. 9-b, also with an auxiliary board.
HITACHI
C 12LSH
C 12RSH
100 x 100
(4" x 4")
HITACHI
C 12LSH
C 12RSH
107 x 220
(4-3/16" x 8-5/8")
120 x 180
(4-11/16" x 7-1/16")
with aux. board width
25 mm (1")
107 x 170
(4-3/16" x 6-11/16")
120 x 130
(4-11/16" x 5-1/8")
with aux. board width
25 mm (1")
] in Table 6 are those
Table 5
HITACHI
C 12FSA
98 x 134
(3-7/8" x 5-1/4")
107 x 122
(4-1/4" x 4-13/16")
[with aux. board width
34 mm (1-5/16")]
Table 6
HITACHI
C 12FSA
98 x 220
107 x 220
(3-7/8" x 8-5/8")
(4-3/16" x 8-5/8")
120 x 162
120 x 180
(4-11/16" x 6-3/8")
(4-11/16" x 7-1/16")
[with aux. board width
with aux. board width
24 mm (15/16")]
25 mm (1")
107 x 180
98 x 155
(4-3/16" x 7-1/16") (3-7/8" x 6-1/8")
120 x 140
120 x 115
(4-11/16" x 5-1/2")
(4-11/16" x 4-1/2")
with aux. board width with aux. board width
25 mm (1")
17 mm (11/16")
Fig. 11
--- 8 ---
Unit: mm (inch)
P
C
102 x 102
(4" x 4")
115 x 115
(4-1/2" x 4-1/2")
Fig. 10
Unit: mm (inch)
C
102 x 216
(4" x 8-1/2")
115 x 203
(4-1/2" x 8")
P