Flash Compensation - Nikon D5100 Reference Manual

Flash Compensation

Flash compensation is used to alter flash output from the level suggested by the
camera, changing the brightness of the main subject relative to the background.
Choose from values between –3 EV (darker) and +1 EV (brighter) in increments of
1
/ EV; in general, positive values make the subject brighter while negative values
3
make it darker.
1
Place the cursor in the information display.
If shooting information is not displayed in the monitor, press the P button.
Press the P button again to place the cursor in the information display.
t
2
Display flash compensation options.
Highlight flash compensation in the information Highlight flash compensation in the information Highlight flash compensation in the information
display and press J.
3
Choose a value.
Highlight a value and press J. To return to
Highlight a value and press Highlight a value and press
shooting mode, press the shutter-release button shooting mode, press the shooting mode, press the
halfway.
Normal flash output can be restored by setting flash compensation to ±0. Normal flash output can be restored by setting flash compensation to ±0. Normal flash output can be restored by setting flash compensation to ±0. Flash
compensation is not reset when the camera is turned off.
72
Information display
J J
shutter-release button shutter-release button
P button