Olivetti d-COPIA3003MF Operation Manual page 370

Use the procedure below to enable user login administration.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Sys. Menu/Count.: a b
4
********************* User/Job Account
5
User Property
6
Common Settings
Login User Name:
*******************
Login Password:
User/Job Account: a b
1 User Login Set.
*********************
2
Job Account. Set.
3
Unknown ID Job
User Login Set.:
1 User Login
*********************
2
Local User List
3
Group Auth.
User Login:
********************* 1 *Off
2 Local Authentic.
3
Netwk Authentic.
1
Press the System Menu/Counter key on the main unit
operation panel.
2
Press the
[ Exit ]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
[ Login ]
3
The User/Job Account menu appears.
4
Press the
[ Exit ]
5
Press the OK key. The User Login Set. menu appears.
a b
[ Exit ]
6
Press the
7
Press the OK key. User Login appears.
a b
8
Press the
[Netwk Authentic.], and then press the OK key.
11-3
or key to select [User/Job Account].
or key to select [User Login Set.].
or key to select [User Login].
or key to select [Local Authentic.] or
Management
11