Olivetti d-COPIA3003MF Operation Manual page 209

Media Type Set
Useable paper types and print densities can be set on the machine for printing. In addition to pre-selected paper,
custom paper can be selected and the weight and print density can be defined. A paper type can be defined from the
operation panel. Useable paper types, factory-set paper weights, and factory-set print densities are shown below. A
paper weight and print density can be changed as needed.
IMPORTANT: When a paper weight and print density are changed, toner fusing problems may cause flaws in the
printed image.
Paper Type
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
High quality
Custom 1 (to 8)*
Yes: Can be stored
* This is a paper type defined and registered by the user. Up to eight types of user settings may
be defined. User can also enable or disable the duplex path when using Custom.
For Custom 1-8, settings for duplex printing and media type name can be changed.
Duplex
Name
Use the procedure below to set the media type setting.
Paper source
Paper
MP tray
Cassette
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes Yes
Yes Yes
No: Cannot be stored
Item
Prohibit Duplex printing not allowed.
Permit Duplex printing allowed.
Change names for Custom 1-8. Names
should be not more than 16 characters.
Selecting media type at multi purpose tray,
the name after change will be displayed.
Default display in the
operation panel
Paper Weight Print Density
Normal2 Normal
Extra Heavy Normal
Normal2 Normal
Heavy1 Normal
Normal3 Normal
Normal2 Normal
Light Normal
Normal3 Normal
Normal3 Normal
Normal3 Normal
Normal2 Normal
Heavy3 Normal
Heavy3 Normal
Heavy3 Normal
Normal2 Normal
Normal2 Normal
Description
8-16
Default Setting (System Menu)
Duplex path
Yes
No
Yes
No
Yes
Yes
No
Yes
No
Yes
Yes
No
No
No
Yes
Yes