Removing Paper Jam In The Finisher - Samsung SCX-6545N Service Manual

Digital laser mfp
Hide thumbs Also See for SCX-6545N:
Table of Contents

Advertisement

4. Troubleshooting
When an error occurs, first, you may follow an instruction on the control panel display to solve the
problem.
Messages on the display indicates the machine's status or errors. Refer to the tables to
understand the messages' meanings and correct the problem if necessary. Messages and their
meanings are listed in alphabetical order.
Note
If a message is not in the table, reboot the power and try the printing job again. If the problem persists, call for
service.
When you call for service, provide the service representative with the contents of the display message.
Some messages may not appear in the display depending on options or models.
Error message
Paper jam at exit of finisher
Paper jam at exit of mailbox
Paper jam in front of finisher
Paper jam inside finisher's duplex
Paper jam inside mailbox
Paper jam inside of finisher
Staple cartridge is empty. Replace it
Staple cartridge is not installed. Install it
in finisher

4.1 Removing paper jam in the finisher

1. Check if there is a paper jam in the exit of the
finisher. If there is one, remove it.
Service Manual
CÓPIA NÃO CONTROLADA
Troubleshooting
Solution
See Removing paper jam in the finisher" on page 4-1. "
See Removing paper jam in the mailbox" on page 4-3 "
See Removing paper jam in the finisher" on page 4-1 "
See Removing paper jam in the finisher" on page 4-1 "
See Removing paper jam in the mailbox" on page 4-3 "
See Removing paper jam in the finisher" on page 4-1 "
See Replacing a stapler cartridge" on page 4-5 "
See Replacing a stapler cartridge" on page 4-5 "
2. Open the front cover of the finisher.
4-1
CÓPIA NÃO CONTROLADA
SAMSUNG ELECTRONICS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents