Rf Description; Receiver (Rx) - Nokia 3600 Slide Service Manual

Pin Signal name
1, 2 HS_ GND
3 HS_MIC
4 HS_EAR_R
5 HS_EAR_L
6 PLUG_DET

RF description

Receiver (RX)

An analogue signal is received by the phone's antenna. The signal is converted to a digital signal and is then
transferred further to the baseband (eg. to the earpiece).
The receiver functions are implemented in the RF system module.
Signals with different frequencies take different paths, therefore being handled by different components.
Page 5 –16
Table 9 AV connector pins
Direction
-
Input
Output
Output
Input
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Description
Ground)
Microphone
Audio out
Audio out
Plug detection
RM-352; RM-354
System Module
Issue 1