Service Modes; Service Modes (For Facsimile) - Panasonic UF-490 Service Manual

5 Service Modes

5.1.

Service Modes (For Facsimile)

5.1.1. Service Mode Table
The following service modes are provided to assist you in setting operational functions of the unit and
determining the condition of the unit.
Caution:
The factory default parameters are preset (destination dependent) for optimum performance and in
compliance with the local telecommunication regulations/standards, and do not need to be changed.
Changing some of these parameters may cause the unit to be no longer compliant or become
inoperable.
No. Service Mode
1 Function Parameter Setting
2 RAM Edit Mode
3 Print Parameter List / Reports
4 Modem Tests
5 Diagnostic
6 RAM Initialization
7 LBP Service Mode
8 Check & Call
9 System Maintenance
Allows changes to the function parameters (the home position,
etc.).
Factory use only.
Prints the Function Parameter List, Page Memory Test, Printer
Report, All Document File, Protocol Trace, Toner Order Form
and Drum Unit Order Form.
Generates various binary, tonal and DTMF signals, by the
modem.
Performs various hardware tests.
Initialize RAM and restore the default value of the function
parameters.
Changes the Printer Parameters.
Allows input of information for Service Alert Report,
Maintenance Alert Report, Toner Order Form and Drum Unit
Order Form.
Used for Firmware Update and Sending a Received File
during a fatal printer error.
125
Description