2. You can adjust the height of the legrest in
the following two ways:
Alternative 1: Loosen the Allen screw (B) using
a 5 mm Allen key on the front of the telescopic
tube, place the legrest in the desired position and
secure it into place using the Allen screw.
B
Alternative 2: Loosen the Allen screw (C) by
the legrest attachment as shown in the diagram.
Adjust to the desired height and then retighten
the screw.
C
3. Loosen the rear screw (D) on the side of the
tube and adjust the legrest to the desired angle.
Retighten the screw. Repeat this procedure to
adjust the angle of the other legrest.
D
Rea
®
Azalea
14