To Use the Wired Touch Pen
Replacing the Tip
1 Remove the tip holder and tip from the touch pen.
Tip Holder
Tip
Connecting the Wired Touch Pen
USB IN
Y
Wired touch pen
holder
NOTE
ꔈ The wired touch pen must be connected to the designated USB port on the back of the TV ('USB input (wired
pen)').
ꔈ You can press the Power button on the wired touch pen to turn it on. If you press and hold the button for more
than three seconds, the wired touch pen will be turned off.
ꔈ The wired touch pen will be turned off automatically if it is not used for eight minutes.
ꔈ The wired touch pen stand provided can be mounted anywhere.
ANTENNA/
CABLE IN
L/MONO
P
P
B
R
1
IN (ARC)
IN (ARC)
AUDIO IN (PC)
ANTENNA/
CABLE IN
AV IN 2
L/MONO
Y
P
B
P
R
USB IN
Y
P
B
2 Replace the tip with a new one and attach the tip holder with
the new tip to the wired touch pen.
Tip
Tip Holder
Follow the instructions below to connect the wired touch pen to
the TV.
1 Connect the wired touch pen to the 'USB IN1 input (wired
pen)' port on the TV.
2 Once the wired touch pen is connected, hold the remaining
wire in place using the wired touch pen holder.
1
IN (ARC)
IN (ARC)
AUDIO IN (PC)
ANTENNA/
CABLE IN
AV IN 2
L/MONO
Y
P
B
P
R
ANTENNA/
CABLE IN
L/MONO
P
R
31
PENTOUCH
ANTENNA/
CABLE IN