Tidying Cables - LG PH47 series Owner's Manual

Separate purchase(Wall Mounting Bracket)
Model
vESA (A x B)
Standard screw
Number of screws
Wall mount bracket
A
B
CAUTION
y Disconnect the power first, and then move or
install the TV. Otherwise electric shock may occur.
y If you install the TV on a ceiling or slanted wall, it
may fall and result in severe injury.
Use an authorised LG wall mount and contact the
local dealer or qualified personnel.
y Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
y Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the manufacturer's warranty.
NOTE
y Use the screws that are listed on the VESA
standard screw specifications.
y The wall mount kit includes an installation manual
and necessary parts.
y The wall mount bracket is not provided. You can
obtain additional accessories from your local
dealer.
y The length of screws may differ depending on the
wall mount. Make sure to use the proper length.
y For more information, refer to the manual supplied
with the wall mount.

Tidying cables

1
42/50PH47**
50/60PH67**
400 x 400
M6
4
PSW420BX
2
y Do not move the TV by holding the cable holder
ASSEMBLING AND PREPARING
Install the Power Cord Holder and Power Cord. It will
help prevent the power cable from being removed by
accident.
(Only 42PH47**)
(Only 50PH47**, 50/60PH67**)
Gather and bind the cables with the Cable Holder.
Cable holder
CAUTION
and power cord holder, as the cable holders may
break, and injuries and damage to the TV may
occur.
21
Power cord holder
Power cord holder