Panasonic Viera TC-L42D30L Operating Instructions Manual page 31

Setup
Item
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
• H & V
• On Green
Reset to Defaults
Eco Navigation
Child Lock
ANT in
• Cable
• Antenna
Favourites Edit
Channel List
Auto Tuning
Manual Tuning
Update Channel List
New Channel
Message
• Off
• On
Signal Condition
OSD Language
• English
• Portuguese
• Spanish
Adjustments / Configurations (alternatives)
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
•
Options change depending on signals
Sets to the minimum level if noise occurs.
Eliminates flicker and distortion
•
Adjust after Clock adjustment
•
Set to the minimum level if noise occurs
PC sync signal type
[H & V]: by the horizontal and vertical signals from your PC
[On Green]: Sync on Green sync from your PC
Press the OK button to reset the PC Setup settings to the default
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save] [On]
[Intelligent Auto Standby]
[Auto Standby] [2 hours]
Locks a channel / AV input to prevent access to it (p. 38)
Select Antenna input type ([Cable] / [Antenna])
•
All tuning data will be erased.
Creates a list of favourite channels (Digital TV mode) (p. 35)
Skips the unwanted channels or edits channels (p. 35, 37)
Sets all Digital TV or Analogue TV channels automatically (p. 36, 37)
Sets the TV channels manually (p. 36, 37)
Updates the channel list while keeping your settings (Digital TV mode)
(p. 36)
Selects whether to give a notification message when a new channel is
found (Digital TV mode) (p. 36)
Checks the Digital TV signal condition (Digital TV mode) (p. 36)
Changes language for on screen displays
Adjusts horizontal position
Adjusts vertical position
[On (No reminder)]
31