Panasonic Viera TC-L42D30L Operating Instructions Manual page 27

P-NR
• Off
• Min
• Mid
• Max
3D-COMB
• Off
• On
Setup Level
• Normal
• With setup 7.5IRE
Screen Display
• Off
• On
R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Reset to
Defaults
R-Hue
G-Hue
B-Hue
R-Saturation
G-Saturation
B-Saturation
R-Luminance
G-Luminance
B-Luminance
Reset to
Defaults
Gamma
• 1.8 / 2.0 /
2.2 / 2.4 / 2.6
Reset to
Defaults
Motion Picture Pro
• Off
• Mid
• Max
24p Smooth Film
• Off
• Mid
• Max
Film Cadence
Detection
• Off
• On
Picture Noise Reduction
Automatically reduces unwanted picture noise and flicker noise in the
contoured parts of a picture
•
Not valid on PC signal
Makes still or slow moving pictures look more vivid
•
Occasionally, while viewing still or slow moving pictures, colour patterning
may be seen. Set to [On] to display sharper and more accurate colours.
•
For NTSC signal reception only
•
Not valid on Component (Y, P
Selects dark or light picture
•
You can set this function for each input.
•
Not valid on Digital TV mode
Turns the screen off when you select [Off]
•
The sound is active even if the screen turns off.
•
Press any buttons (except Standby) to turn the screen on.
•
This function is effective in reducing power consumption when listening
to the sound without watching the TV screen.
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Press the OK button to reset to the default White Balance
Adjusts the picture hue of red area
Adjusts the picture hue of green area
Adjusts the picture hue of blue area
Adjusts the saturation of red area
Adjusts the saturation of green area
Adjusts the saturation of blue area
Adjusts the luminance of red area
Adjusts the luminance of green area
Adjusts the luminance of blue area
Press the OK button to reset to the default Colour Management
Switches the gamma curve
•
Please note the numerical values are reference for the adjustment.
Press the OK button to reset to the default Gamma
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth and clear
•
Depending on the contents, images may be noisy. To prevent the noise,
change the setting.
•
This function is not available for selection (default to [Off]) when
[Viewing Mode] is set to [Game] or in the mode of PC input, photo or
Network service operations.
Automatically compensates the picture frame rate to make the 24p
source movie images smooth
•
This is available only for 24p signal input and displayed instead of
[Motion Picture Pro].
•
This function is not available for selection (default to [Off]) when [Viewing Mode]
is set to [Game] or in the mode of PC input, photo or Network service operations.
Automatically makes the film source movie images clear
/C , P /C ), PC, HDMI and Media Player
B B R R
27