Panasonic Viera TC-L42D30L Operating Instructions Manual page 28

Resolution
Enhancer
• Off
• Mid
• Max
16:9 Overscan
• Off
• On
H-Size
• Normal
• Extended
Colour Matrix
• SD
• HD
DVI Input Setting
• Normal
• Full
Lock Settings
Copy Adjustment
Reset to Defaults
∗ 1 : Only when [Advance(isfccc)] is [ON] and [Lock Settings] is [Off]
∗ 2 : Only when [Viewing Mode] is [Professional1 (isf Day)] or [Professional2 (isf Night)] and [Lock
Settings] is [Off]
∗ 3 : Only when [Lock Settings] is [Off]
28
Enhances the picture resolution to make the image sharper
•
This function is available for SD (Standard definition) signal.
•
As for HD (High definition) signal, this function is available when aspect
mode is set to [16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or
[Zoom].
•
Not valid on VIERA Connect and Media Player
[On]: Default - Image is overscanned by ~5% beyond the edge of the
screen to hide edge video noise
[Off]: Displays image in its original size including edge video noise such
as lines, dashes, dots etc.
•
Applicable for video signals when TV aspect is set to [16:9]
•
Memorised separately for SD and HD channels / signals
Switches over horizontal scanning size
Available only with 480p input on video signals in a natural colour from
digital equipment connected to AV1 component (Y, P
HDMI1 / HDMI2 / HDMI3 terminals. Select [SD] or [HD] to adjust suitable
colour parameters for [SD] (standard definition) or [HD] (high definition)
•
[SD]: Input signal is a normal TV system
•
[HD]: Input signal is a high definition system
Changes the black level in the image for HDMI input mode with DVI input
signal manually
•
When the DVI input signal from the external equipment, especially from
PC, is displayed, the black level may not be suitable. In this case, select
[Full].
•
The black level for HDMI input signal will be adjusted automatically.
•
For HDMI input mode with DVI input signal only
Locks for each Viewing Mode and input.
Additionally, [Backlight], [Contrast], [Brightness], [Colour], [Sharpness],
[Tint], and [Reset to Defaults] in the Picture Menu can be locked for
[Professional1] and [Professional2].
•
Make a note of the PIN number in case you forget it.
You can copy the selected [Professional1] or [Professional2] settings to
that of the other input.
The settings of [Contrast], [Brightness], [Colour], [Sharpness], [Tint] and
[Advanced Settings] will be copied.
•
You cannot copy to the locked mode.
Press the OK button to reset the present Picture Viewing Mode of the
selected input to the default settings
/C , P /C ) or
B B R R