Region Code Settings; Basic Operations - BenQ Joybook 5000 Series User Manual

2 Enter Accepts the selected option.
3 1 - +10 Number pad.
4 Karaoke K Switches among karaoke modes.
5 Eject Ctrl+E Opens the disc drive door.
Switches among available angles, if
6 Next angle A
any.
7 Repeat Ctrl+R Repeats titles, chapters, songs, etc.
Shuffle; AB Plays tracks randomly; repeats selected
8 U, X, R
Repeat; Go Up scenes; return to disc menu.
Plays computer-generated visualiza-
9 Visualization
tions.
Adds bookmarks for specific DVD
10 Add bookmark Ctrl+F2
scenes.
11 Go to bookmark F2 Directly goes to bookmarked scenes.
Control Wheel
2 3
1
8 9
No. Button/Icon Hotkey
Shuttles reverse at incremental speeds
1 Shuttle reverse
indicated by green point.
2 Previous P Returns to previous chapter.
Space
3 Pause Pauses playback.
Bar
Shuttles forward at incremental speeds
4 Shuttle forward
indicated by green point.
5 Next N Jumps to next chapter.
6 Play Enter Plays media.
7 Step forward T Goes to next frame.
8 Step backward Ctrl+B Goes to previous frame.
9 Stop S Stops playback.
4
5
6
7
Description

Region Code Settings

Most of the DVD titles in today's markets are governed by a regional code that
divides the world into six separate regions. This ensures maximization of revenues
for motion picture studios' theatrical and home releases, which times and dates
vary from region to region.
1. Open PowerDVD and insert the DVD you wish to play into the optical drive.
2. Upon inserting your DVD, note the dialog box. Click OK.
3. After the region has been set, this dialog box will no longer prompt you unless
an encoded DVD title from another region is inserted.
PowerDVD will only allow you to set the regional settings five times until the
regional code is fixed. Subsequently, playback of DVD titles will be specific to one
region. Some DVD titles may not be region-specific.

Basic Operations

Playing DVDs
1. Open PowerDVD, insert your DVD disc and click the Play button. Be sure that
the source is correct. If not, click the Select source button and choose the right
drive.
2. A warning message or copyright information will appear depending on the
DVD title. Usually, this content cannot be skipped over.
3. After the promotional content, you will be presented with the main menu. With
your mouse, select by clicking once. The DVD will begin playing.
4. To use the Menu/Number pad, click the outer button to the farthest right cor-
ner of the user interface and a pad will appear (located to the right of the Con-
trol Wheel).
5. To Stop or Pause, click them accordingly.
Playing VCDs/SVCDs
1. Open PowerDVD and insert the VCD/SVCD you wish to play into the optical
drive. Be sure that the source is correct. If not, click the Select source button
and choose the right drive.
2. Click the Play button. The VCD/SVCD will begin playing. Depending on the
VCD/SVCD title, some may offer a title menu. Depending on your title, the on
screen menu selection can be clicked on directly or use the Number Pad to
select.
• All VCDs/SVCDs will have the capability of navigating, so put the navi-
gational slider to full use and navigate as you wish.
• You may also Shuttle Forward or Shuttle Reverse.
• Click Next or Previous to skip or return to chapters depending on if
your title supports it.
Using the Q-Media Bar 21